What are hub stands? They bolt on to your hubs in place of your wheels so you have full access to the suspension while the car is on the ground. They also sit on steel balls so they can move around and take any preload out of the suspension. This makes it easy to corner-weight the car and tighten up suspension bolts.
But wait, there's more! The stands are also designed to make it easy to align the car yourself. Toe and camber are dead simple, while caster and even thrust angle are straightforward. You can turn the adjusters and watch the settings change. You will need a pair of tape measures and some way to measure camber
That's right, you'll never pay for an alignment again. We use these in our workshop all the time, even if it's just to set the bushings after a suspension install.
Fits the following:
ALL MX5'S and....
- All 4 bolt patterns ranging from 4 x 95.25 to 4 x 114.3 (that's 4 x 3.75" to 4 x 4.5") on cars using 12mm or 14mm stud.
- All 5 bolt patterns ranging from 5 x 100 to 5 x 130mm on cars using 12mm or 14mm studs.
- For all cars, the maximum hub diameter is 72.5 mm and the weight limit is 1850KGS (455KG per stand).
Sold as a complete set of four including thrust alignment cables.