Go toLog in Go toSign up

Haltech Elite 1500 Engine Management PnP Kit (NB 2000-2004)

  • Sale
  • Regular price $2,650.00 AUD
Includes GST


Elite 1500  with RACE FUNCTIONS + Plug'n'Play Adaptor Harness Kit

Note: Does not support 99 model.

Please Note: Manual transmission only.

The NB version (HT-150921suits NB8B (00-04) 1.8L Factory Turbo SE (Aus),  with 3-plug, 3-row factory ECU. This product does not fit NB8A.

SPECIFICATIONS

Fuel Injector Outputs:
• 4 x Current controlled injector drivers
• High or low impedance injector compatible
• Programmable Peak Current – 0A – 8A
• Programable Hold Current – 0A – 2A
• All spare injector outputs can be used as generic DPOs with 1A Max output.

Ignition Outputs:
• 4 x Over current protected ignition drivers
• Max current 1A per driver
• All spare ignition outputs can be used as generic DPOs with 1A Max output.

Digital Pulse Outputs:
 
5 x Over current protected low side pulsed outputs
• 1 x Dedicated engine control relay output which can control up to 6 relays simultaneously

Drive By Wire (DBW) Outputs:
• 2 x Over current protected hi / low side motor outputs
• Suits most OEM throttle bodies and pedals
• Max current 5A per driver
• 1A Average current
• 100KHz Max frequency

Stepper Motor:
• 1 x 4 wire stepper motor control
• Can be configured as 4 x hi / low side outputs
• Max drive current 1A per output
• Max sink current 1A per output
• Over current protected

Analogue Inputs:
• 10 x Analogue Voltage Inputs (2 of which are compatible with narrowband O2 sensors)
• Switchable 1K Ohm pull-up resistor for sensors
• Rated up to 20V Max input voltage
• Supports up to 1.5KHz input frequency

Engine Position Inputs:
• 
2 x Engine position inputs with extensive trigger type support
• Supports variable reluctor and digital inputs

Synchronised Pulse Inputs:
• Supports variable reluctor and digital inputs
• 50KHz Max frequency• Rated up to
20V Max input voltage

Knock Control:
• Supports piezo knock sensors
• Synchronised to engine position

Internal MAP Sensor:
• 3 Bar Internal MAP Sensor rated up to 200kPa of Boost (2bar/29psi)

Communication:
• 2 x CAN Bus communication for Haltech CAN and vehicle CAN expansion
• 1 x USB connection for programming

Data Logging:
• On-board data logging (up to 40 channels of logging)
• Sample Rate 5ms
• 1MB Internal Storage


INCLUDESElite 1500 ECU, Plug'n'Play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin TYCO plug and pins. Waterproof USB cap, USB programming cable and software CD.

THIS ITEM IS SPECIAL ORDER AND WILL TAKE APPROX 2-4 DAYS TO SHIP


 


People who bought this product, also bought