Quality Camshaft Set INLET/EXHAUST from Maruha Motors Japan.
Duration | Lift | HLA | |
INLET | 252° | 8.5mm | Adjusted |
EXHAUST | 256° | 8.5mm | Adjusted |
The NA6CE and B6 the camshaft corresponds HLA: F-cam (set of 252°・256°) and the HLA lock type’s inner shim is a set of 264°and 264°.
The NB6C is an outer shim type.
The NA6CE’s F-cam is not a product that aims for power, but a product that aims for a stable pickup.
Its profile allows it to bring out a very good result even on short circuits.
Recommended valve timing:
The recommended valve timing is 110°at both IN and EX sides.
Even if you reuse the genuine pulley, the valve timing is going to be near the recommended one, but if you aim for more appropriate valve timing a slide pulley has a very good effect. Even in the case of the head’s surface grinding, exchange of the gasket etc. we recommend using a slide pulley.
These cams also require a set of lifters AND new cap shims to check measure.
Finally, you will need to purchase the required sizes for the final installation.
Suits NA6 1989-1993 Sold as a pair