The BEST RF Springs, the EASY way to lower your MX5 RF correctly! These springs result in about 1 inch of lowering, rates are about 20% stiffer than stock. These are made exclusively for Good-Win Racing for the RF version of the ND Miata to work with stock shocks and have heights and stance work out correct for the RF version (most OTHER springs not calibrated for higher rear weight of RF end up with rear settling too low eventually and ugly reverse rake jokingly known in the forums as the 'speedboat' look). Rates are specific to the RF version, adding a little more rear spring rate to balance the car correctly with the extra rear weight of the RF version. Detailed specs below:
Ride Height
Stock heights on our ND were 14.25 to 14.75. Lowered heights with these springs approximately 13.5 inches front, and generally a bit over 13.5+ inches rear (measured car empty centre of wheel up to fender lip, car levels once people are added since driver and passenger are almost sitting on rear suspension). RF Springs shown here with our 17x7 Storm Wheels
The engineering staff at Progress has decades of experience in the design and tuning of performance suspension systems, including CART/Indy Cars, IMSA, SCCA, NASA, and SCORE competitors. These MX5 springs reflect their ability to develop a successful blend of appearance, handling capability, and ride quality. Our team works with Progress on each Miata application spring, and with nearly a decade of working with Progress we know the result will show the quality and consistent performance that we feel raises the cornering joy level of the ND platform to a new level.
Spring Rate
STOCK spring rates are 156 front for all models, and 80 to 100 rear.
Progress RF Spring rates 185 Front, 135 rear.
These MX5 RF springs feature increased spring rates for upgraded handling capabilities. These springs are designed to work with OEM shocks and bumpstops but will benefit further from using high performance shocks such as Koni Sport shocks. Progress specifies only certified high-tensile SAE spring wire materials. Their MX5 springs are cold-wound on modern CNC coiling machines, then stress relieved, pre-set, and shot-peened for maximum durability.
-All spring kits are powdercoated metallic gray.
-Drop amount varies by 0.25" depending on shocks used.
Suits ND RF Model